服务范围
1.1服务范围
服务能力涵盖以下机型:
1.1.1 GE 燃机系列:
GE Mature
- Frame 3002 11MW轻型燃机
简介:
In the 1950s, General Electric designed, constructed and installed hundreds of 2-shaft gasturbines.
Frame 3002系列是GE公司于19世纪50年代设计、建造了几百台双轴的燃气轮机。
The units had two,mechanically-independent turbine stages.The high-pressure (HP)turbine powered the turbine’s own 15-stage, axial-flow compressor.
这些机组有两级机械相互独立的燃机涡轮,高压动力透平(HP)驱动燃机的15级叶轮,轴流式压气机。
The low-pressure (LP)turbine drove another manufacturer’s load compressor (Cooper -Bessemer, Nouvo Pignone,Dresser).
低压动力透平(LP)驱动另外一家制造商生成的压气机(Cooper-Bessemer库柏, Nouvo Pignone意大利-新比隆,Dresser 德莱斯)
These turbines were used primarily in the gas pipeline and petro-chemical industries andremain in popular use today throughout the world.
这些燃机主要应用再天然气管线和石油化工行业并至今仍在世界各国使用。
Large gas pipeline companies (ex: El Paso GasCompany) and chemical companies (ex: Dow Chemical) purchased these turbines to drivevariable-speed load compressors
最大的天然气管道公司(如厄尔巴索天然气公司)和化工公司(如美国陶氏化学公司)购买了这些机组来驱动低压压缩机。
- Frame 5001
简介:
The MS5001 is one of the industry’s most well-known gasturbines in the 26-MW class.
MS5001型燃气轮机是行业内26MW级最为熟知的一款燃机。
It is a single-shaft, heavy-dutyunit with exceptional reliability and availability proven in over2,500 installations worldwide.
MS5001型燃机是一台单轴的,超常可靠、经久耐用的重型燃气轮机,全球范围内安装超过2500台。
The MS5001 product line is GE’s second productline that is still in production (after the MS3002product line).
MS5001产品线是GE仍在运营的第二条产品线(自MS3002产品线之后的)
- Frame 5002A-D
The MS5002 is a gas turbine specifically designed for mechanical drive applications such as gasboosting, gas injection/re-injection, oil & gas pipelines, LNG plants and gas storage.
MS5002型燃气轮机是一款专门为机械驱动装置的应用,诸如天然气增压、天然气加注/回注,石油/天然气管线,LNG接收站和天然气储罐等设计的一款燃气轮机。
It has a broadoperating speed range to meet the operating requirements of the most common driven equipment(centrifugal compressors and pumps) as well as the ability to burn a large variety of gaseous andliquid fuels.
它有较宽的运行速度范围以满足大多驱动装置的运行需要(离心式压缩机和泵)同可用多种气态及液态燃料燃烧。
- Frame 6B
Frame 6B型燃气轮机作为二十世纪八十年代我国的主流燃机机型,在燃机行业圈被广泛认知和接受。二十世纪80年代中期,我国从英国JB公司引进了6套PG6531B型燃气轮机,当时配套引进了两台荷兰的余热锅炉和一台西门子的汽轮机组成了国内的第一套燃气轮机联合循环发电机组,此次也是我国燃气轮机第一次配套技术引进,当时将6B型燃气轮机的制造技术引进给了南京汽轮机厂,从而掀起了我国燃气轮机的国产化进程。
多年前,我们公司也是从6B机组的售后服务上最早推广燃机第三方服务的,至此,业内服务经验已经超过二十年。此后又不断扩大燃机服务的范围,实力也不断提升。
- Frame 7E
- Frame 9E
9E燃机作为GE在我国的主流燃机,其在中国的机组数量目前是最多的燃机机型。
GE Advanced
- Frame 5 AT
- Frame 6F
- Frame 7F
- Frame 9F
1.1.2 西门子/三菱西屋 成熟型
Siemens/MHI Westinghouse Mature
- W251 B6-12
- TG20
- SGT6-3000E (501D5/D5A)
- 701D
- SGT6-2000E (V84.2)
- SGT5-3000E (V94.2)
- AE94.2
- SGT6-1000F (V64.3A)
1.1.3 西门子/三菱/AE 先进型
Siemens/MHI/AE Advanced
- SGT6-5000F (M501F/W501F)
- M701F
- SGT6-6000G (W501G)
- SGT6-4000F (V84.3A)
- SGT5-4000F (V94.3A)
- SGT6-8000H (NG60)
1.1.4阿尔斯通/ABB成熟型
Alstom/ABB Mature
GT- 9D
GT- 11D
GT- 11E
GT- 13D
1.1.5 阿尔斯通/ABB 先进型
Alstom/ABB Advanced
GT- 13E1
GT- 13E2